Open as PDF
Chapter 7 Setup Menu
104 Chapter 7 Setup Menu
Basic Menu Operations
This section describes the basic menu displays and
how to change the settings.
Displaying the menus
Press the MENU button.
The setting of the currently selected menu item appears
in the LCD monitor and sub LCD.
Output from the VIDEO OUTPUT 2 (SUPER)
When the control panel CHARACTER switch is set to
ON, the same menu screen also appears on a monitor
connected to the VIDEO OUTPUT 2 (SUPER)
connector as shown in the LCD monitor.
*HO1:OPE HOURS - 102
HO2:DRUM HOURS - 52
Cursor indicating the currently
Group name for the currently selected item
Changing the currently displayed menu
Turn the jog or shuttle dial depending on the current
search mode (indicated by JOG/SHUTTLE indicators).
Turning the jog or shuttle dial in the clockwise
direction increments the item number, and turning it in
the counterclockwise direction decrements the item
If you turn the shuttle dial, the item number changes at
a rate depending on the shuttle dial angle. If you turn
the jog dial, the item number changes on the jog dial
Jog and shuttle