13-1 Overview of Setup Utility Menu Functions
Chapter 13 Setup Utility Menu Functions
13-2 Chapter 13 Setup Utility Menu Functions
5 Press the F5 (SET) button.
The selected file is downloaded.
Note
Do not do any of the following during the download.
Doing so can corrupt the ROM software of this unit,
making the unit unable to download normally.
• Power the unit off.
•Remove or insert a memory stick.
•Remove or load a cassette.
To upload a file to a memory stick
Proceed as follows.
1 Press the F2 (UPLOAD) button.
The menu display changes, allowing you to
execute the upload. The name of the currently
selected file is flashing on the screen.
SUP
UTL
EXITSET
UPLOAD SETUP - DBMNRXXX.SUP
HOME F1 F2 F3 F4 F5 F6
2 With the HOME button held down, rotate the
MULTI CONTROL knob to select the file to
upload.
3 Rotate the MULTI CONTROL knob to display
“EXEC OFF”.
SUP
UTL
EXITSET
UPLOAD SETUP - EXEC OFF
HOME F1 F2 F3 F4 F5 F6
4 With the HOME button held down, rotate the
MULTI CONTROL knob to switch EXEC OFF to
EXEC ON.
SUP
UTL
EXITSET
UPLOAD SETUP - EXEC ON
HOME F1 F2 F3 F4 F5 F6
When you want to redo a file selection, rotate the
MULTI CONTROL knob to display the file name
again, then go back to step 2.
The monitor screen display changes as follows.
ROM TO STICK
File:
EXECUTE - ON
XXXXXXXX.XXX
SETUP MENU UPLOAD
STICK <- VTR
5 Press the F5 (SET) button.
The selected file is uploaded.
Note
Do not do any of the following during the upload.
Doing so can corrupt the ROM software of this unit,
making the unit unable to download normally.
• Power the unit off.
•Remove or insert a memory stick.
•Remove or load a cassette.
To format a memory stick
1 Press the F3 (FORMAT) button.
The menu display changes, allowing you to
execute formatting.
SUP
UTL
EXITSET
FORMAT - EXEC OFF
HOME F1 F2 F3 F4 F5 F6
2 With the HOME button held down, rotate the
MULTI CONTROL knob to switch EXEC OFF to
EXEC ON.
SUP
UTL
EXITSET
FORMAT - EXEC ON
HOME F1 F2 F3 F4 F5 F6
The monitor screen display changes as follows.
FORMAT STICK
All data in the MEMORY
STICK will be deleted.
EXECUTE - ON
to MS-DOS
CAUTION!!