Filter
Top Products
3-2 Reference Signals for Video Output and Servo System
Chapter 3 Preparations
3-12 Chapter 3 Preparations
3-6 Using a Memory Stick
When a Memory Stick (option) is inserted in the
VTR, the file data can be stored on the Memory Stick,
which enables you to share data among VTRs.
Inserting a Memory Stick
Insert a Memory Stick with the label side up into the
Memory Stick slot until it clicks and the access lamp
lights in red.
Note
Never insert/remove a Memory Stick during access to
data.
To remove a Memory Stick
If you push the inserted Memory Stick, the Memory
Stick will pop out a little. Then pull the Memory Stick
out.
3-6-1 Notes on Memory Stick
On Memory Stick
Memory Stick is a new compact, portable and
versatile IC recording medium with a data capacity
that exceeds that of a floppy disk. Memory Stick is
specially designed for exchanging and sharing digital
data among Memory Stick compatible products.
Because it is removable, Memory Stick can also be
used for external data storage.
Types of Memory Stick
There are two types of Memory Stick: MagicGate
Memory Stick that are equipped with the MagicGate
copyright protection technology and general Memory
Stick. Use the general type of Memory Stick (8MF,
16MF, 32MF, 64MF, 128MB) with this unit.
On MagicGate
MagicGate is copyright-protection technology that
uses encryption technology.
Before using a Memory Stick
• You cannot record or erase data when the write-protect
tab on the Memory Stick is set to LOCK.
•We recommend backing up important data.
•Image data may be damaged in the following cases:
– If you remove the Memory Stick, or turn the
power off when the access lamp is lit or flashing
– If you use a Memory Stick near static electricity or
a magnetic field
Label side
Memory Stick
Terminal
Write-protect tab
Labeling position