Sony HVR-M25AU VCR User Manual


 
Appendix 101
Appendix
COMPONENT OUT jacks
OUT BNC type
Output at 480i NTSC
With [BETACAM] selected in [480i LEVEL]
of the [IN/OUT REC] menu
Y: 1.0 Vp-p
(with 0.286 Vp-p sync negative,
output impedance 75 Ω (ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75 Ω (ohms),
unbalanced) (75% color bars with
7.5 IRE setup)
With [SMPTE] selected in [480i LEVEL] of the
[IN/OUT REC] menu
Y: 1.0 Vp-p
(with 0.3 Vp-p sync negative,
output impedance 75 Ω (ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75 Ω (ohms),
unbalanced) (100% color bars
with no setup)
Output with other settings
Y: 1.0 Vp-p
(output impedance 75 Ω (ohms),
unbalanced)
Pb/Cb/B-Y, Pr/Cr/R-Y: 0.7 Vp-p
(output impedance 75 Ω (ohms),
unbalanced)
(100% color bars with no setup)
480i/480p:
Y: with 0.3 Vp-p sync negative
1080i/720p:
Y/Pb/Pr: with 0.6 Vp-p 3-level
sync
HDV/DV jack
i.LINK (IEEE 1394,
6-pin connector S100)
Remote control
LANC Stereo mini-mini jack (ø 2.5)
CONTROL S IN Stereo mini jack (ø 3.5)
LCD screen
Picture 6.7 cm (2.7 type, aspect ratio 16:9)
Total dot number 211 200 dots
960 (Horizontal) × 220 (Vertical)
General
Peak inrush current
Hot switching inrush current,
measured in accordance with
European standard
EN55103-1: 24.0 A (230 V)
Power requirements
HVR-M25AU
AC120 V, 60 Hz
HVR-M25AN
AC100 V-240 V, 50 Hz/60 Hz
HVR-M25AE
AC220 V-240 V, 50 Hz
HVR-M25AP
AC100 V-240 V, 50 Hz/60 Hz
Power consumption (during playback)
13 W
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature
–20 °C to +60 °C
(–4 °F to +140 °F)
(Continued)