Filter
Top Products
Chapter 6 Maintenance 91
Chapter 6 Maintenance
The following alarm messages will appear together with the alarm indicators. Take corrective action according to the
displayed message.
Alarm Messages
Item Message Cause/Corrective Action
Moisture
condensation
% Z Moisture condensation. Eject the cassette. t See page 94 for details.
% Moisture condensation. Turn off for 1H. t See page 94 for details.
Cassette/Tape Q Insert a cassette. t See page 29.
Z Reinsert the cassette. Check for damage to the tape or other
irregularities.
Q Z The tape is locked –check the tab. t See page 28.
Q The tape has reached the end. —
Audio dubbing Cannot add audio. INPUT SELECT is set to HDV/DV. —
Not recorded in DVCAM mode. Cannot add audio. —
Cannot add audio. You cannot add audio unless the recorded
audio format is 32 kHz (4-channel, 12 bit).
Make sure that [60i/50i SEL] in the [OTHERS]
menu is set correctly.
Cannot add audio on the blank portion of a tape. —
HDV recorded tape. Cannot add audio. —
Cannot add audio. “HDV/DV SEL” is set to HDV. —
Others Cannot record due to copyright protection. —
Change to correct tape format. This is an unsupported format and cannot be
played back.
No output image in “HDV/DV SEL”. Change format. Stop playback or signal input, or change the
[HDV/DV SEL] setting (page 70).
x Dirty video head. Use a cleaning cassette. t See page 92.
Unplug power cable. —
Reinsert the cassette. —
Invalid input signal. The signal that has been input to the unit is
invalid. Check the input signal.
Power voltage error. —