Filter
Top Products
Chapter 1 Overview 11
Chapter 1 Overview
2 Tape transport control section
a AUDIO DUB (audio dubbing) (A2) button /
indicator
Use this button to dub sounds. The indicator lights while
sounds are being dubbed. Also, this button can be used
as the ASSIGN (A2) button.
For details on audio dubbing, see “Audio Dubbing” on page
63.
When the unit is in the stop mode, and the INPUT
SELECT switch is set to other than HDV/DV and color
bars are not displayed, you can check the EE signals of
the sound (channels 3 and 4) to be dubbed by pressing
this button. While the operation is in progress, the
indicator lights. To stop the operation, press the STOP
button.
For details, see “EE/PB SEL” in the “IN/OUT REC” menu
on page 74.
When you change ASSIGN buttons setting with
[ASSIGN [A2]] of [ASSIGN BTN] in the [OTHERS]
menu, this button executes the function you have set.
For details on ASSIGN buttons, see “ASSIGN BTN” on page
80.
b DUPLICATE button / indicator
Use this button to duplicate a tape, including the time
code. While duplication is in progress, the indicator
lights.
For details on the duplicate function, see “Duplication
(Generating a work tape with the same time code)” on page
59.
When the unit is in the stop mode and HDV/DV signals
are selected and input, you can check the EE signals for
an image, sound and time code by pressing this button.
While you are checking EE signals, the indicator lights.
To stop this operation, press the STOP button.
For details, see “EE/PB SEL” in the “IN/OUT REC” menu
on page 74.
For details on time codes, see “HVR-M25AU/M25AN/
M25AE/M25AP time codes” on page 56.
3 REC (record) button / indicator
1 AUDIO DUB (audio dubbing)
(A2) button / indicator
4 FF (fast forward) button / indicator
2 DUPLICATE button / indicator
7 STOP button
5 PLAY button / indicator
8 PAUSE button / indicator
6 REW (rewind) button / indicator
(Continued)