Filter
Top Products
this helps you out.
Christine118 on September 13, 2007 11:01 AM
Thanks so much. I found those parts on the website you posted. Wait, actually, it says for the second part you listed that that part is no
longer offered and this is now a replacement: 8-719-074-43. Except I didn't see my model as one of the models it's okay to use for. What do
you think?
Is there a manual we can follow since we don't have much experience with this?
Larry Dillon on September 13, 2007 11:37 AM
Yes it is fine to use with your TV set.. I do not have this service manual. One can be purchased from HERE
homeslice on September 13, 2007 11:56 AM
Hi Larry, thank you very much for the service manual. I just received and installed the new G1 board for my KDF-42WE655 but it still blinks
6 times. I'm at a loss.
Christine118 on September 13, 2007 12:33 PM
Thanks a lot Larry...I'll let you know how it goes.
vp on September 13, 2007 1:52 PM
sonyjon said:
bstair said: I have a kp51hw40 and it's showing a green screen and then shutting off and showing 8 blinks. Is this really only an audio
problem? Any idea on where to get parts and repar?
Bstrair, Did you ever get a reply? have the same error code, 8 blinks, but does not seem like an audio problem to me. Jon
jon,
I have same problem. did you get your tv fixed? Pls. let me know what was the probelm.
Thank you,
vp
buzzle on September 14, 2007 1:25 AM
buzzle said:
buzzle said: Hi Larry, I got a KV-32HV600/ chassis DA4 build in Oct 2002 TV set just went off to the standby LED with 7 blinking code
with no video/audio. I was able to reset it by unplugging the power cord for several hours a few time but now it refuses to cooperate. This set
is too heavy to bring to the service shop and they'll charge me $150 to just come out and look at it for an estimate. Repair service/part will
cost separately on top of the estimate fee. If you have the service diagram and part number/module's location that can help me identify the
faulty component; I' really appreciated for the advise Thank you, Dass
Hello Larry, Haven't heard anything back from you yet, thought that i want to update with some finding Standby LED blink 7 times relate to
high voltage shutdown that exceed 33k which feed to the main picture tube. Where exactly are the PSU and the horizontal circuit for this
problem ? Also, there is something about the horizontal deflection stop that need to be check out or reset Can you help to locate and provide
some tip to troubleshoot this issue please ?
Hi Larry,
I bought the service manual from the link that you provided to other reader. I found the main PSU and Horizontal deflection circuit on the
D board. So, can i just replace the failure component (which one/part #) or I need to replace the whole D-board ?
Thank you for any advise.
Dass
Larry Dillon on September 14, 2007 8:54 AM
Dass, the problem might be the transformer as the blink codes only give the tech a clue where the problem is. If you are experienced
troubleshooting the circuits with a schematic and can follow circuit flow, then for sure repair the D board. But if it does not work by replacing
the parts mentioned, you will inevitably need to replace the D board if you can find one. You could also take out the D board and ship it to
ptscorp.com, they overhaul boards for people. Go to the website and get the toll free number and give then a call. Good Luck.
Christine118 on September 14, 2007 2:23 PM
Hi - I actually ordered the service manual yesterday. I tried to look through it myself, but on the diagrams, they don't show a G board. I'm
probably missing something. On the positive side, I did get the TV to turn on, and for now, will just turn the cable box off and leave the TV
on.
Larry Dillon on September 14, 2007 7:50 PM
Christine 118, send me a copy of the manual, maybe this set has it all incorporated into the main power supply board. Send it to
techman32k@yahoo.com
G-Star on September 15, 2007 1:22 PM
hey Larry,
I'm stuck...we can't get the high voltage cable out from the FBT...tried turning it 90 but no go...any suggestions.
ji
so we were able to pull the cable from the hub but still can't get it off the FBT...is that normal...do i ship it out as is inorder to replace the
FBT?
teammaness on September 18, 2007 9:00 AM
Hello, I have a Sony KP-57WS500 tv. About 8 months ago the set went down on the last day of the warranty, the service man came out and it
was a bad picture tube and it was replaced. About 2 months later the set went down again, now the set is blinking six times. Is this something
that can be easily fixed? Where can I get a service manual for this unit? Thank you in advance for you help and suggestions.
Penn
Teammaness@aol.com