Filter
Top Products
Operation Instruction
20
Select the Finish button to finish the EZ Record and select
the Go to EZ Network button to start the EZ Network.
Figure 18 — EZ Network screen.
If you selected the Go to EZ Network, select the Next button
to start the EZ Network.
Internet Connection
Select whether or not your DVR is connected to the Internet.
LAN Setup
Select between Auto Configuration and Manual Configuration
for network configuration, and then select the Test button to
test the network configuration you selected.
NOTE: Selecting Auto Configuration allows the DVR to
automatically obtain LAN parameters (IP address,
Gateway, Subnet Mask and DNS Server address).
Selecting Manual Configuration allows you to set
up LAN parameters manually.
NOTE: The network configuration you set should be tested
by selecting Test, otherwise the Next button will
cannot be selected, and cannot move to the next
step.
Use DSL/PPPoE Setup: Selecting the box allows you to
set up the DSL network. Entering the ID and password for
DSL connection is required.