Filter
Top Products
16-Channel Digital Video Recorder
39
The DVR can be set up to contact a computer running Speco
Central (Remote Administration System) when an event occurs.
Highlight the box under the No. heading and press the
button to toggle between On and Off. You will only be able
to change the IP addresses if No. is enabled.
Highlight the IP Address box that you want to change and
press the
button. Use the arrow buttons to enter the IP
address of the computer you want contacted during an event.
You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times
you would like the DVR to try contacting the computer. You
can select from 1 to 10 retries.
Figure 50 — Notification Callback setup screen.
Highlight the Mail tab, and the Mail screen displays.
Figure 51 — Notification Mail setup screen.
The DVR can be set up to send an email when an event occurs.
The Mail account can be turned On or Off by highlighting
the boxes under the No. heading and pressing the
button.
Highlight the + and press the button to add a mail recipient.
Highlight the first box under Recipient and press the button. A virtual keyboard
appears that you can use to enter the recipient’s e-mail address.
Highlight the second box under Recipient and press the button. You can select
between Manual and listed SMTP mail server providers.
NOTE: The e-mail address must include the “@” character to be a valid address.
Highlight the box under the heading and press the
button to toggle between On and Off. The DVR will clip an
event detected video segment and attach it to an email when the
box is turned On.
NOTE: Attaching a video clip to an email will not be available for the Text-In event.
The Mail accounts can be deleted by highlighting the beside the account and pressing the button.
Highlight SMTP Setup… and press the
button. The SMTP Setup screen appears.
Highlight the box beside Type and press the button. You can select
between Manual and listed SMTP mail server providers.
Highlight the box beside SMTP Server and press the button. A virtual
keyboard appears that you can use to enter the IP address or domain name
of the SMTP server.
NOTE: You will need to get the IP Address or domain name of the
SMTP Server from your network administrator.
NOTE: You can use the domain name instead of IP address if you
already set up the DNS Server when setting up the LAN.