Speco Technologies CS16 DVR User Manual


 
Operation Instruction
40
Highlight the box beside Port and press the
button. Use the arrow buttons to enter the SMTP Server port number
obtained from your system administrator. The default port number is 25.
Highlight Use SSL/TLS and press the button to toggle between On and Off. When it is On, the DVR can send an
email via an SMTP server requiring SSL (Secure Sockets Layer) authentication.
NOTE: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).
Highlight the box beside Authentication and press the button. An Authentication
screen appears. Highlight Use and press the
button to toggle between On and Off.
Highlight the box beside User/Password and press the
button. A virtual keyboard
appears allowing you to enter the user ID and password.
Highlight the box beside Sender and enter the sender’s e-mail address. Use the virtual keyboard to enter the e-mail
address.
NOTE: The e-mail address must include the “@” character to be a valid address.
Highlight the Test box and press the button to test emailing with the current settings you made.
Highlight the SNS tab, and the SNS screen displays.
Figure 52 — Notification SNS setup screen.
The DVR can be set up to post a message via SNS (Social
Network Service) when an event occurs. You can add and edit
the SNS (Social Network Service) account on this screen. The
SNS account can be turned On or Off by highlighting the boxes
under the No. heading and pressing the
button.
To add an SNS account, highlight the + and press the button. Highlight the
box beside Type and press the
button. Selecting Twitter from the Type allows
you to post a tweet on Twitter when an event occurs.
Highlight the box beside User Name/Password and press the button. A virtual
keyboard appears allowing you to enter the user name and password.
The SNS accounts can be deleted by highlighting the beside the account and pressing the button.
NOTE: Posting a tweet might fail because of Twitter limitations.
Highlight the Schedule tab, and the Schedule screen displays.