Filter
Top Products
Operation Instruction
46
Highlighting OSD Margin… and pressing the button displays how OSD text will
be displayed on the monitor. You can adjust the horizontal and vertical margins so
that text and icons will not be hidden beyond the edges of the monitor.
Highlight the Main Monitor tab to switch to the Sequence screen.
Figure 62 — Main Monitor screen.
Highlight the box beside Mode and press the button. You
can select between Full Sequence and Cameo Sequence.
Selecting (Sequence) in the Live Monitoring menu causes
the DVR to sequence cameras, and the DVR can sequence
cameras in two modes: “Full” and “Cameo”. In the Full mode,
the DVR sequences through the cameras and displays them
full screen. In the Cameo mode, the bottom right window in
a multi-screen format sequences through the cameras.
NOTE: Any cameras that are Off, have lost video or are set
to Covert (unless the user has authority to view
covert cameras) will be excluded from the Cameo
sequence.
You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts
(pages) so that all the cameras will be displayed. You can also set up the DVR to display one camera or a group of
cameras all the time while cycling through the remaining cameras in a “cameo” window. This can be done with one
camera displayed full screen while displaying the cameo window as a PIP (picture in picture), or displaying the cameras
in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 4x4 display mode.
You can adjust the display dwell time by highlighting the box beside Interval and pressing the button. You can select
dwell intervals ranging from 1 second to 1 minute.
Highlight Event Monitoring On and press the button. Pressing the button toggles between On and Off. When
it is On, the DVR will display the camera associated with the event when an event occurs.
Highlight the VGA tab to switch to the VGA screen.
Highlight the box beside Resolution and press the
button.
You can select from 800x600, 1024x768 and 1280x1024.
Figure 63 — VGA screen.
Highlight the box Test box and press the
button to test how the screen will be displayed with the resolution you set.
Highlighting OK and pressing the button applies resolution changes.