Speco Technologies CS16 DVR User Manual


 
16-Channel Digital Video Recorder
51
Audio: Selecting Audio toggles audio output On and Off.
Color Control: Selecting Color Control and choosing the camera number allows you to control brightness, contrast,
hue and saturation for each camera for the selected camera if a user who has Color Control authority logs into the
system. It is the same as pressing and holding a camera button for a few seconds.
NOTE: It is important that cameras and monitors are correctly installed and adjusted prior to making any image
adjustments using the DVR’s controls.
Any image adjustments you make will be applied to both the live video on the monitors and the recorded
video.
The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
live monitoring mode.
Alarm
Selecting
(Alarm) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer during an
alarm. It is the same as pressing any button on the front panel when the alarm is activated.
Digital Deterrent
Selecting
(Digital Deterrent) in the Live Monitoring menu displays the following setup screen and allows the DVR
to play manually.
Highlight the box beside Source name and press the
button to
select the source file to play. Highlighting Trigger plays the selected
file as the digital deterrent.
Panic
Selecting
(Panic) in the Live Monitoring menu starts panic recording of all cameras, and displays
on the screen.
Selecting
again stops panic recording.
Setup
Selecting
(Setup) in the Live Monitoring menu enters the Main Setup screen. Refer to Chapter 3 Configuration
for detailed descriptions of system setup.
Search Mode
Selecting
(Search Mode) in the Live Monitoring menu exits the live monitoring mode and enters the search mode.
It is the same as pressing the
PLAY/STOP button.
Login/Logout
Selecting
(Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting
(Logout) in the Live Monitoring menu displays the Logout
screen asking you to confirm whether or not you want to log out the current user.
PTZ: Selecting PTZ and choosing the camera number allows you to control the selected camera
as long as it has Pan, Tilt and Zoom capabilities. Refer to the following PTZ Mode section for details.
Zoom: Selecting Zoom and choosing the camera number zooms the current image of the selected
camera on the screen. Refer to the following Zoom Mode section for details.