Filter
Top Products
Modem hang up. Resetting
The connection has been closed or terminated unexpectedly.
Timeout during login process. Giving up
The PPP client connecting over the modem has waited too long to complete the
authentication process or supplied an invalid user name and/or password.
Modem init chat script failed
The modem did not respond to the initialization string from the SV1115IPEXT. You may
need to change the init string or verify the cabling and modem status.
Modem init okay
The modem has responded appropriately to the init string.
Saw PPP startup from client
A PPP authentication has occurred and a session has started.
Phone line rings
An incoming call has been detected by the modem.
Modem answers: xxxxxxxxx
The connection speed and protocol used for a connection, as reported by the modem.
The exact contents of the message will vary depending on the modem make and model.
Using Optional Serial Remote Control (R-Port) Modules
Serial Remote Control operation
Background
The SV1115IPEXT offers a unique way to expand the functionality of the base product.
Using the integrated R-Port on the rear panel, you can manage up to 8 serial devices
using a specialized daisy-chain technology. The SV1115IPEXT includes integrated
control functionality that allows you to monitor and configure serial devices using the
interactive Web interface. To minimize space and infrastructure requirements, the R-Port
modules use a single cable to carry both power and the data signal. All configuration
settings are stored separately in each attached device in non-volatile memory so that
they will not be lost in the event of a power outage or disconnection.
Connecting Serial Remote Control Modules to the SV1115IPEXT
The cable for each serial device is similar to a phone cable and uses an RJ-14
connector. For the first module, connect the cable (provided) to the R-Port on the rear
panel of the SV1115IPEXT. Connect the opposite end to the DATA OUT (or similar) port
on the Serial Remote Control unit. Note that some devices may use an integrated cable,
so you will not need to make a separate connection on the serial device. Once you have
added the first serial device to the SV1115IPEXT, you can connect additional modules to
the DATA IN (or similar) port on the previous module in the chain. Once the cabling is
attached, the module becomes active after a 15 second initialization period. For specific
information regarding cabling and status indicators for a specific serial console, refer to
the instructions that came with the product.
Instruction Manual
39