Filter
Top Products
Installing the SV1115IPEXT
Connecting the Unit to the Host Computer and Network
Please note: It is important that multiple users not be connected to the same physical
network.
Follow these instructions if the host computer uses a PS/2 keyboard and mouse:
1. Power down the computer to which the SV1115IPEXT will be connected (
host
computer
). If purchased, install the unit in your rack or cabinet following the
instructions that came with the 1110EXTRACK (optional, not included).
2. If present, disconnect the existing monitor and PS/2 keyboard/mouse from the host
computer.
3. Using the provided integrated KVM cable, locate the end with the male VGA (monitor)
connector and connect it to the VGA-out connector on the back of the host computer.
4. Connect the PS/2 keyboard and mouse connectors on the same end of the integrated
Instruction Manual
3
Video (IN) Host
Keyboard
Host
Mouse
USB WAN LAN DCE Serial DC
(IN)
DC
(IN)
(2)
USBFAB_3
(Optional)
Network Infrastructure
Ethernet Patch Cable(s) for
LAN/WAN
Host Computer
Integrated
KVM Cable
USB Hub (Optional)
Local Keyboard, Mouse, Monitor
(Native PS/2 or optional USB)
Internet/
Intranet
Remote
User