Filter
Top Products
will no longer generate a warning if that option is selected. Second, if you install the
certificate from the SV1115IPEXT onto the host computer (see below) and if the unit is
configured with a domain name ending in .com, .net, .org, .gov, .edu, .us, .ca, .uk, .jp, or
.tw (i.e. remotecontrol.mydomain.net) then the warning should no longer occur.
Installing the new certificate…
The following instructions detail how to install the certificate from the SV1115IPEXT onto
your local computer (in this case, when using Internet Explorer with Windows XP).
1. Open your Web browser and go to the SV1115IPEXT login screen. Click the Update
security certificate link.
2. When prompted, choose Open.
3. A Window will appear that offers information about the certificate. Click Install
Certificate.
4. The Certificate Import Wizard will appear. Select Automatically select the
certificate store… (default) and click Next. When the next window appears, click
Finish.
5. A confirmation dialog will appear asking you if you wish to install the certificate. Click
Yes.
6. A message should appear saying the import was successful. Click OK.
Troubleshooting
Forgotten master password.
You can reset the master password using the serial interface on the unit. Use the S
command, and type a new password. The old password is not required for this
procedure.
Remote mouse and local mouse don't line up.
Use the Mouse resync command in the main menu or press the Resync button on the
Bribar. If the mouse pointers still don't line up, verify that mouse acceleration has been
disabled.
NOTE: The Windows login screen does not accept the “mouse acceleration”
configuration, and always has the mouse accelerated regardless of your configuration.
Therefore, on this screen it is best to avoid using the mouse.
After resync, the mouse pointers are still not aligned.
Use the video adjust menu to position your video image exactly where it should be.
Normally a slight video positioning error is perceived as a mouse sync issue. A video
positioning error is visible as a black line along the top or bottom (and right or left) edges
of the remote screen. Remember to save your position changes!
Cannot login via SSH.
Instruction Manual
43