Filter
Top Products
2–Pump 12-Station Controllers Chapter 3: Installation 22
SET INPUT DELAY?
NO/YES
TO SELECT A STATION
PRESS STATION <1-12>
The screen displays the station you selected (11 in the above example), and the current dump
delay time setting. Using number keys 1 to 0, enter the new dump delay time (in seconds)
into controller memory. Keep in mind that the value shifts to the left as you enter. Use the 0
key to shift to the next multiple of ten.
To exit from the Dump Delay menu and return to the Station Settings menu:
• Press the CLEAR key.
To save the new value and escape from the Dump Delay menu:
• Press the ENTER key.
To save the new value to the controller memory and increment to the next station in the
sequence:
• Press the SET key.
If you press the SET key without entering a value, the original value is retained and the
controller moves to the next station in the sequence.
Set Input Delay, Station Settings Menu
The third submenu under Station Settings is the Set Input Delay submenu.
To set input delay time:
• Press the YES key.
The following screen displays.
The Input Delay function protects the system from erroneous inputs caused by noise or
mechanical vibration. The signal must be present for the input delay time setting duration for
the input to be recognized.
To alter input delay time:
• Press the YES key.
The following screen displays.