Filter
Top Products
2–Pump 12-Station Controllers Chapter 8: Service Only Information 60
SET LCD BLINK DELAY?
NO/YES
BLINK DELAY: .500s
PRESS ENTER TO SAVE
Setting the LCD Blink Delay
LCD Blink Delay lets you alter the ON/OFF time that the LCD blinks during an alarm. This
delay does not effect the Visual or Audible alarm outputs. The delay defaults to 0.5 seconds
and should not be altered unless you are instructed to do so by the Service Department.
At the above message prompt:
1. Press the YES key to enter the LCD Blink Delay menu.
Using the keypad:
2. Enter the new time and press the ENTER key to save the new settings.