Filter
Top Products
2–Pump 12-Station Controllers Chapter 3: Installation 29
BLOWBACK SETTINGS?
NO/YES
SELECT PUMP 1 OR 2
USE KEYPAD TO ENTER
ENABLE BLOWBACK?
NO/YES
Changing Blowback Settings, Pump Settings Menu
As an option, you can equip the conveying system filter chamber with a blowback feature to
pulsate compressed air through the filter. This function cleans the filter after a pre-set number
of load sequences.
To set up the controller blowback feature, enter the Pump Settings menu, then:
• Press the MENU key until the Blowback Settings prompt screen displays:
• Press the YES key to alter the blowback settings.
The following screen displays.
Each pump can have separate blowback settings. To alter pump settings, select a pump:
• Using the keypad, enter the pump number (1 or 2).
The following screen displays.
To disable the blowback feature:
• Press the NO key.
The screen returns to the Pump Settings menu.
If you want to enable the blowback feature:
• Press the YES key.