Filter
Top Products
2–Pump 12-Station Controllers Chapter 8: Service Only Information 67
OEM MENU ACCESS
IS NOW AVAILABLE!
OEM SETTINGS?
NO/YES
8-2 Other Controller Restricted Areas
Using the OEM Service Menu
The OEM service menu (Original Equipment Manufacturer) lets you set parameters not
commonly used. It also contains functions to aid in the installation of the controller. Access
to this menu should be restricted to setup and maintenance personnel only.
To gain access to the OEM service menu:
1. Remove power from the controller.
2. Press and hold the Zero 0 key and re-apply power. While holding the Zero 0 key,
allow the controller to initialize.
The controller displays the message below and permits access to the OEM service
menu.
Gain access to the OEM service menu by entering the menu system. An additional menu
screen is shown below.