Filter
Top Products
2–Pump 12-Station Controllers Chapter 3: Installation 25
ALARM AFTER 3 LOADS
PRESS ENTER TO SAVE
STATION SETTINGS?
NO/YES
ASSIGN PUMP>STATION?
NO/YES
TO SELECT A STATION
PRESS HOPPER <1-12>
To exit from the Alarm Setting time menu and return to the Station Settings menu:
• Press the CLEAR key.
Assigning a Pump to a Station
This function lets you easily set all 12 stations.
From the main operating screen:
1. Press the MENU key until the following screen displays:
To enter the Station Settings menu:
1. Press the YES key.
2. Press the MENU key again until the following screen displays:
To assign pumps to stations:
1. Press the YES key.
The following screen displays: