Filter
Top Products
Menus
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-7
ST.TM.E10100.1
C.5.3 8PSK/16QAM Menu
The 8PSK/16QAM submenu accesses the 8PSK/16QAM parameters.
Table C.6: 8PSK/16QAM Menu
Display title: 8PSK/16QAM Description
Quality
Eb/NO XXX.X dB XXX.X is a measure of the signal to noise ratio (first X is + or -)
Source 1
Modulation FEC XXXX XXXX
XXXX XXXX is the EDITABLE modulation and FEC rate
QPSK 1/2
QPSK 2/3
QPSK 3/4
QPSK 6/7
QPSK 7/8
8PSK 2/3
8PSK 5/6
8PSK 8/9
8PSK Auto
16QAM 3/4
16QAM 7/8
16QAM Auto
C.6 Service Menu (#3)
The Service menu allows access to the currently available services. This
group provides a summary of the data streams associated with the
decoded service. In the case of multiple streams of the same component
type, each stream can be selected independently.
After making a selection (in EDIT mode using page 1), and selecting the
required component data streams (using the other pages), pressing SAVE
makes it the current service. The audio, DVB Subtitles, Teletext and data
modules will decode according to the default parameters set in other
pages.
Table C.7: Service Menu
Display title: Service Description Section
Video The Video signal status submenu contains information about the
currently decoded MPEG-2 video.
C.6.1
Audio 1 The Audio 1 signal status submenu contains information about
the audio format and quality of the currently decoded audio
stream on the primary audio output.
C.6.2
Audio 2
The Audio 2 signal status submenu contains information about
the audio format and quality of the currently decoded audio
stream on the secondary audio output.
C.6.3
Async/Sync Data The Async/Sync Data submenu allow status monitoring and
configuration of the low and high speed data.
C.6.4