Filter
Top Products
Installing the Equipment
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 2-3
ST.TM.E10100.1
2.1 Read This First!
2.1.1 Handling
The TT1260 must be handled and installed carefully and thoughtfully to
prevent safety hazards and damage.
2.1.2 Installing the Equipment
Ensure the personnel designated to fit the unit have the appropriate skills
and knowledge. If in any doubt, contact TANDBERG Television Customer
Services (see Preliminary Pages for contact details).
Installation of the product should follow these instructions, and should only
use installation accessories recommended by the manufacturers. When
rack mounted, this equipment must have shelf supports as well as being
fixed at the front panel.
Do not use this product as a support for any other equipment.
2.1.3 Lifting
Although this product only weighs approximately 4 kg (8.8 lb), in some
circumstances it might be awkward to lift. In which case, do not attempt to
lift or move it without proper assistance or equipment. If in doubt, seek
assistance.
2.2 Preliminary Checks
2.2.1 Mechanical Inspection
WARNING…
REMOVING THE COVERS OF THIS EQUIPMENT MAY INVALIDATE ANY WARRANTIES, CAUSE A
SAFETY HAZARD OR/AND AFFECT THE EMC PERFORMANCE. CHECK WITH TANDBERG
TELEVISION CUSTOMER SERVICES.
Inspect the equipment for damage-in-transit. If in doubt, please contact
TANDBERG Television Customer Services (see Preliminary Pages).
2.2.2 Moving the Equipment Safely
An appliance and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the appliance and
cart combination to overturn. Do not move or carry the equipment whilst it
is still connected to the supply or other leads, is live, or is in operation.
Do not place this product on an unstable cart, stand, bracket,
or table. The product may fall, causing serious injury and
serious damage to the product. Use only with a cart, stand,
bracket or table recommended by TANDBERG Television Ltd.