Filter
Top Products
Installing the Equipment
Page 2-8 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
Figure 2.3: Location of the Technical Earth
2.7 Signal Connections
2.7.1 General
CAUTION...
It is strongly recommended that the terminal marked at the rear panel of the equipment is connected
to a site Technical Earth before any external connections are made and the equipment is powered. This
limits the migration of stray charges.
All signal connections are made via the rear panel. A typical rear panel is
shown in Figure 2.4. The connections are also shown schematically in
Figure 2.5, and a full technical specification is given in Annex B.
The Receiver provides a flexible transport stream input interface. It is not a
requirement for the equipment to support more than one optional input
type in any one configuration.
The status information appropriate to each input type is available to the
user via the User Interface, and also via the remote control interfaces.
Figure 2.4: Typical Decoder Rear Panel
Location of the Technical Earth