Filter
Top Products
24
6.4. Setting the Functions
Perform the following settings referring to the Basic Setting Operations on p. 23.
6.4.1. Operation mode
Sets the unit's operation mode.
Step 1. Press the Menu key to display the menu screen.
Step 2. Tilt the joystick up or down to select "OPERATION MODE," and confirm it by pressing the SET key.
The setting contents will be displayed on Line 2.
Step 3. Tilt the joystick left or right to select either of the following setting contents and confirm it with the
SET key.
OPERAT I ON MODE
1.MASTER
[Setting contents]
1. MASTER Be sure to select Master when only a single C-RM500 unit is used.
When 2 units are connected, set either unit as the Master and the other as "SLAVE."
2. SLAVE When 2 units are connected, set either unit as "SLAVE," and the other as "MASTER."
Note: Operation mode is set as "1. MASTER" by the factory.