Filter
Top Products
46
7.4. Connection to the Smart Switcher's RS-232C Terminal
• When connecting the camera's video output cable to the Multi-Switcher, match the Multi-Switcher's camera
input terminal number with the camera's address number.
• The C-CC551 and C-CC554 Combination cameras permit settings of up to 255 camera positions (camera
orientation), and the C-CC501 and C-CC504 permit settings of up to 64 positions. All are equipped with 8
alarm input terminals. To expand the alarm input, connect the C-AL80 Alarm Input Unit to the C-RM500
Remote Controller.
Note
Do not use the Smart Switcher's Alarm input terminal as the unit could malfunction.
• To switch the display to the fixed camera output when an alarm signal is received, connect the Alarm Input
Unit to the unit. Also, in the unit's abbreviated number setting, set the position number of the fixed camera to
be switched to when an alarm signal is received to "0".
• The Alarm Input Unit activates the alarm for the abbreviated number. For details, refer to the section
"Abbreviation" on p. 38 in this manual, and the instruction manual included with the Alarm Input Unit.