Filter
Top Products
7
7. 4-segment split-screen key *
1
, *
2
Displays camera images in the 4-segment split-
screen format. Subsequent depressions of this
key can cycle through 4 separate groups of 4-
segment split-screen displays.
8. Sequential 4-segment split-screen key *
1
Sequentially cycles through all connected
camera outputs of up to 4 groups of cameras at
a preset time interval. Program sequencing and
viewing intervals are set at the Smart Switcher
when connected.
9. Group selector key *
1
, *
2
Switches on-screen camera groups during 4-, 9-
or 10-segment split-screen display.
10. Sequence key *
1
, *
2
Sequences all connected camera outputs to the
full screen at the specified time interval. (Viewing
intervals are set at the switcher.)
11. CH call key *
1
, *
2
Displays the camera number on the monitor for a
preset period of time. This key is convenient for
finding the camera number when no indication or
only the camera name is displayed.
12. Menu key
Displays the menu on the Remote Controller's
LCD screen for setting functions. To enable,
press lightly with a pointed object. When the
menu is opened and the desired item is selected,
the screen under the setting will be displayed.
Pressing the key again will close the setting
screen and the display will disappear.
13. LCD screen
Displays character information for the setting
menu, numeric keypad input status, current
operation, etc.
14. Zoom key *
3
Sets the Combination camera's zoom lens for
"TELESCOPE" or "WIDE ANGLE" operation.
The Zoom key can only be used while the
Control indicator is on.
15. Focus key *
3
Sets the Combination camera's zoom lens for
"FAR" or "NEAR" operation. The Focus key can
only be used while the Control indicator is on.
16. Lens speed key / Indicator *
3
Adjusts the speed of lens operation when the
Zoom or Focus key is pressed.
17. Joystick *
3
Controls the attached pan/tilt head's horizontal
and vertical movement. The joystick can only be
used while the Control indicator is on.
18. Numeric keypad [0 – 9]
Used to enter the camera number, position
number, abbreviated number, etc.
19. Clear key [C]
Used to correct entry errors. Also, turns off the
buzzer when sounded by an activated alarm.
20. SET key
Used in conjunction with the numeric keypad to
program the camera number or position number.
Also, if pressed after entering the set abbreviated
number with the numeric key, the camera image
corresponding to that number can be displayed
on the monitor.
21. Wiper key *
3
Remotely controls the outdoor-use Combination
camera's wiper. This key can only be used while
the Control indicator is on.
22. Defroster key/Indicator *
3
Remotely controls the outdoor-use Combination
camera's defroster. This key can only be used
while the Control indicator is on.
23. Auxiliary contact key / Indicator *
3
Controls (makes or breaks) the Combination
camera's Auxiliary Contact Output 1. The
indicator is on when auxiliary contact is at make,
and off when the contact is at break. This key
can only be used when the Control indicator is
on.
24. Auto key / Indicator *
3
Enables or disables the Combination camera's
automatic functions (Auto-Pan, Auto-Trace, and
Preset Sequence). The Auto key can only be
used when the Control indicator is on.
• Auto-Pan
Automatically pans a camera pan/tilt head.
• Auto-Trace
Automatically executes manual camera
operations stored in memory.
• Preset Sequence
Automatically sequences camera positions in
the order of preset position numbers.
25. Auto-focus key / Indicator *
3
Enables the Combination camera's Auto-Focus
function. This key can only be used when the
Control indicator is on.
26. Freeze screen key / Indicator *
1
, *
2
Freezes camera images. However, sequential
displays cannot be made still. The indicator
flashes when there is a freeze image on the
screen.