Toshiba RD-XV48DTKF VCR User Manual


 
25
EN
Channel Setting
You can retune this unit or edit the channel setting
with following methods.
Auto Tuning (DVB & ANALOG)
Programme the tuner to scan both analogue and DVB
channels you can receive in your area.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].
General Setting menu will appear.
2 Select “Channel” using [U \ D],
then press [ENTER].
3 Select “Auto Tuning (DVB &
ANALOG)” using [U \ D], then press
[ENTER].
The unit will start storing channels available in
your area.
Wait for several minutes to finish channel storing.
Analogue channels will be stored in channel
901-999 after it is scanned by this unit.
4 Press [SETUP] to exit.
You can select only the channels memorised in
this unit by using [PROG. G\H].
To cancel auto tuning
Press [RETURN] or [SETUP] during scanning.
Note
The selection will be affected by how you receive TV
channels in your local area.
If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
You cannot change the channel when this unit is in
any recording mode (normal recording, One-touch
Timer Recording or timer recording).
Auto Tuning (ANALOG)
Programme the tuner to scan only the analogue
channels you can receive in your area.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].
2 Select “Channel” using [U \ D],
then press [ENTER].
3 Select “ANALOG Channel Setup”
using [U \ D], then press [ENTER].
4 Select “Auto Tuning” using [U \ D],
then press [ENTER].
The unit will start storing channels available in
your area.
Wait for several minutes to finish channel storing.
Analogue channels will be stored in channel
901-999 after it is scanned by this unit.
5 Press [SETUP] to exit.
You can select only the channels memorised in
this unit by using [PROG. G\H].
To cancel auto tuning
Press [RETURN] or [SETUP] during scanning.
Note
The selection will be affected by how you receive TV
channels in your local area.
If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
You cannot change the channel when this unit is in
any recording mode (normal recording, One-touch
Timer Recording or timer recording).
Sorting of TV channels from 901 to 906 will be
performed automatically as follows.
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Auto Tuning (DVB & ANALOG)
DVB Channel Setup
ANALOG Channel Setup
Country
ANALOG
901: TF1 902: F2 903: F3
904: CANAL+ 905: F5/ARTE 906: M6
ANALOG Channel Setup
Auto Tuning
Manual Tuning
Move
Introduction Connections Basic Setup Playback Editing OthersFunction SetupRecording VHS Functions
E3NG0FD_EN.book Page 25 Wednesday, January 30, 2008 10:37 AM