Filter
Top Products
66
EN
Cancelling and Recalling the PBC
Function
Insert a Video CD.
1 In stop mode, press [SETUP].
2 Select “CD Playback Mode” using
[U \ D], then press [ENTER].
3 Select “PBC (Video CD only)” using
[U \ D], then press [ENTER].
4 Select “OFF” using [U \ D], then
press [ENTER].
5 Press [SETUP] to exit.
To recall the PBC function, select “ON” at step 4
above.
Note
• The default setting of “PBC (Video CD only)” is
“ON”.
Special Playback
Resume Playback
You can resume playback from the point where you
stopped it before.
1 During playback, press [STOP C].
The resume message will appear.
2 Press [PLAY B].
In a few seconds, playback will resume from the
point at which you stopped it before. Even if you
turn off the unit, you can resume playback at the
same point after turning back on the unit.
For title in the HDD, you can also play from the
resume point by selecting “Resume Playback” at
step
7
of “Playing Back an HDD / DVD-RW / DVD-R
/ DVD+RW / DVD+R Disc” on page 60.
To cancel the resume playback and start playing
back the disc from the beginning:
Press [STOP C] while playback is stopped.
For HDD:
You can set a resume point per every title.
For DVD-Videos, DVD+RW/+R, DVD-RW/-R, Video
CD, Audio CD, MP3 files, JPEG files, and DivX
®
files:
You can set only one resume point per disc.
Note
• For Video CDs, if you turn PBC on using “Setup”
menu, the resume function is cancelled.
• For MP3 and JPEG files, playback will resume from
the beginning of the track at which playback was
stopped.
VCDVCD
(PBC OFF)
Random Play
Programme Play
PBC (Video CD only)
Slide Show
CD Playback Mode
HDDHDD
D
D
VD-V
VD-V
DVD-V D
D
VD-R
VD-R
W
W
DVD-RW
Video
DVD-RWDVD-RW
VR
DVD-RDVD-R D
D
VD+R
VD+R
W
W
DVD+RW D
D
VD+R
VD+R
DVD+R CD
CD
CD
VCD
VCD
VCD
(PBC OFF)
MP3MP3
JPEG
JPEG
JPEG DivX
DivX
®
DivX
®
E3NG0FD_EN.book Page 66 Wednesday, January 30, 2008 10:37 AM