Filter
Top Products
92
EN
3. RGB Range (Default: Normal)
You can adjust the RGB range to make the dark areas
of the HDMI images brighter.
Select a setting using [U \ D], then
press [ENTER].
• Select “Enhanced” if the black-white contrast is not
clear.
• This setting is effective only for HDMI RGB output.
Your setting is activated.
Reset All
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].
2 Select “Reset All” using [U \ D],
then press [ENTER].
3 Select “Yes” using [U \ D], then
press [ENTER].
“Are you sure?” will appear. Select “Yes” using
[U \ D], and then press [ENTER].
4 When you finish with the setting,
press [SETUP] to exit.
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- Channel setting
- Parental lock setting
-DivX
®
VOD code
- Timer Programmes
RGB Range
Normal
Enhanced
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
General Setting
Reset to factory default?
Yes
No
E3NG0FD_EN.book Page 92 Wednesday, January 30, 2008 10:37 AM