3-6
Chapter 3 Basic Operation
3. Document Feed and Eject Trays
Before scanning, prepare the Document Feed and Eject Trays for the desired paper size.
Preparing the Document Feed Tray
■ Opening the Document Feed Tray
When the scanner is turned ON, the Document Feed Tray
opens automatically and moves to the specified home
position height.
Hint
When opening the Document Feed Tray by hand, place your
fingers in the indents at both sides of the tray, and open it gently.
Home Position Setting
The height of the home position (the position to which the
document Feed Tray moves after it opens) can be adjusted
in three steps according to the number of document pages
to be loaded (the default setting is the lowest position,
which accepts up to 500 sheets).
The height of the home position is set by the Tray Position
User Mode setting, which minimizes the time required to
start feeding by specifying in advance the proper position
for the documents to be loaded.
1. Press the Menu key on the control panel.
The User Mode is activated.
2. Press the [ ] key seven times to display Tray
Position. (See p. 4-9.)
3. Confirm your settings.
[0]: To load up to 500 sheets
[1]: To load up to 300 sheets
[2]: To load up to 100 sheets
4. Press [Enter].
Menu Key
Enter Key
