3-22
Chapter 3 Basic Operation
• When the Rapid Recovery System is enabled, scanning pauses
when a double feed is detected, and the following error message
is displayed.
■ When the Rapid Recovery System is Disabled
Return the document pages ejected as a result of double-
feed detection to the top of the document stack yet to be
scanned, and resume scanning.
■ When the Rapid Recovery System is Enabled
1. Check the rejected document page(s).
Hint
• If attached paper, such as a label on the document page,
appears to be the cause of the double-feed detection, ignore
the detection.
• If two document pages were fed together, rescan the double-
fed pages.
2. Press [ ] or [ ] to select [IGNORE] or [RETRY]
and press the [Enter] key.
[IGNORE]:
Saves the image of the page that was detected as a double
feed, and resumes scanning.
[RETRY]:
The display panel appears as below. Return the double-fed
document pages to the tray and press the Start key.
IMPORTANT
• Press the Start key the erase the image that was being
scanned when double feeding was detected, and resume
scanning.
• Press the Stop key to delete all scanned images, finish
scanning, and display an error message.
When detecting double feeds by document length
When detecting double feeds ultrasonically
