Filter
Top Products
94 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels
CONTRAST Press the UP button to increase or DN button to decrease the
contrast of the LCD. The contrast range is 0–255. Press SET TO DEFAULT to
automatically set the contrast level to 100 (factory setting).
SET TO DEFAULT Resets the VIDEO SETUP page to factory default
settings.
NTSC LOCKED / PAL LOCKED Shows which type of composite video
(NTSC or PAL) is being supplied to the panel. The Touch Panel
automatically detects, locks in on the signal type, and displays the video
type in the button.
INTERLACE / NON-INTERLACE Sets the Touch Panel to display the
composite video signal in an interlaced or non-interlaced display format.
Interlaced video refreshes the entire video display at specific time intervals.
Non-interlaced video refreshes every other line of the video display at
specific time intervals.
SAT Sets the color concentration (density) on the Touch Panel LCD. This
button does not appear on the VIDEO SETUP page if the incoming video
signal is PAL format.
HUE Sets the color gradation on the panel LCD. This button does not
appear on the VIDEO SETUP page if the incoming video signal is PAL
format.
— VIDEO WINDOW Sets the button to a video window to display the
incoming video signal.
— VIDEO JOYSTICK Sets the button to a video joystick that displays the
incoming video signal, and a control stick. When you move the control
stick, the Touch Panel sends feedback (data) to the control system and to
the external device to perform a pre-programmed operation.
— RGB SETUP Sets the button to open the RGB SETUP page so you can
adjust the incoming video signal on the Touch Panel.
— PROTECTED Sets the button to open the Protected Setup page. Refer to
Protected Setup Page in this section for more information.
Note
PAL LOCKED disables the
SAT, HUE, and INTERLACE /
NON-INTERLACE features.
Note
The Color Video Touch Panel
does not support non-
interlaced video sources, this
applies to both NTSC and
PAL video formats.
Note
This feature is not available in
the Touch Panel.