Filter
Top Products
Color Active-Matrix LCD Touch Panels Designing a Touch Panel Page 25
3. Type 1988 in the keypad, and press ENTER to open the PROTECTED SETUP
page (Figure 30). For information on changing the password, refer to Touch
Panel Program Reference section. If you enter a wrong number, press CLEAR
and re-enter the number.
4. Press EDITOR to enable the Editor mode. The active mode of the EDITOR
button is shown in Figure 31.
5. Press EXIT to close the PROTECTED SETUP page and return to the SETUP
page in Editor mode.
Note
If you press ENTER after
typing in an incorrect
password, you are
immediately returned to the
previous page.
Figure 30
PROTECTED SETUP page