Filter
Top Products
64 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels
Wireless settings (optional WAV-PKM)
The WIRELESS SETTINGS button appears on the SETUP page when a WAV-PK
WavePack is connected to the Touch Panel. The WAV-PK provides wireless two-
way RF spread-spectrum Touch Panel control and contains a lead-acid
rechargeable battery that supplies independent power to the panel. Refer to the
AXR-WAVES Server, WaveLink, Wireless Power Packs, Power Module AXR-WAVES
WAV-CHG instruction manual for detailed setup information Press the WIRELESS
SETTINGS button to open the optional page shown in Figure 103.
The Wave-Pack page shows the following information:
• SLEEP TIMEOUT Press the UP and DN buttons to set the sleep time. The
minimum sleep time is 0 (off) and maximum is 120 minutes. When the Touch
Panel goes to sleep, all communication and battery discharge stops. If the
sleep time is set to 5, the panel goes into sleep mode if there is no activity for
5 minutes. The Touch Panel automatically wakes up when you touch the
screen for more than .5 seconds.
• GROUP ID Sets the group ID number on the Touch Panel to communicate
with the wireless AXR-WAVES with the same group ID number. The group
ID range is 0–15. The group ID setting overrides the DIP switch setting on
the WAV-PK.
Figure 103
WAV-PK page