Filter
Top Products
46 Designing a Touch Panel Page Color Active-Matrix LCD Touch Panels
Setting the channel code
1. The two fields to be set for the joystick channel code are DEV (device) and
CHAN (channel) as shown in Figure 69.
2. Press DEV to open a keypad and set the joystick’s device number.
3. Type 1, 2, 3, or 4 in the keypad. The device number specifies the device
number for the selected channel’s feedback is displayed.
4. Press ENTER to store the device code in memory, close the keypad, and return
to the BUTTON PROPERTIES page.
5. Press CHAN to open the keypad and set the channel number.
6. Type in a channel value of 1 to 255 in the keypad. The AXCESS software
program uses the channel code number to identify the button and programmed
operations.
Figure 68
BUTTON PROPERTIES
(JOYSTICK) page
Note
If you continued the
procedures from the Adding a
joystick to a page subsection,
this will be the button's
properties page when you
select it.
Figure 69
Joystick CHANNEL code
buttons
Note
The channel code for non-
active buttons is 0, and for
active buttons it's 1 through
255.