Filter
Top Products
Chapter 8
FM Radio
-43-
Setting the Audio Mode
The application will automatically set each FM radio channel to Mono or Stereo based
on the audio mode of the FM radio signals received. You can change the audio mode
of a stereo FM radio signal to Mono or vice versa.
To change the audio mode:
1. Click the Setup button , and then click the FM Radio tab.
2. Click on the channel whose audio mode you want to change.
3. Select the Audio Mode option you want: Mono or Stereo.
If the audio quality of a FM radio channel is found unstable or a bit
poor, you can also try to switch the audio mode between Mono and
Stereo to get a better audio quality.
Adding and Deleting Channel Groups
Selecting a Channel Group allows you to switch between the channels of the selected
group only when pressing the Channel Up/Down button. If you want to add or
delete an FM channel group, do the following:
To add a new channel group:
1. Click the Setup button , and then click the FM Radio tab.
2. Click the Add Button.
3. The New Group Name dialog box will appear. Type the group name you want
and then click OK.
4. Now you can start to scan FM radio channels and manage the scanned FM data
for this new channel group. For more information, refer to How to Auto Scan
FM Radio Channels and other titles respectively.
5. To add more channel groups, repeat steps 2 to 4.
To delete a channel group:
1. Click the Setup button , and then click the FM Radio tab.
N
N
o
o
t
t
e
e