Filter
Top Products
23
Figure 2.2.1. Display mode setup screen
Table 2.2.1. Menu items in DISPLAY mode setup
Item Description
OSD
Enable/disable on-screen-display.
Select ON and press SEL button, then user are able to control OSD display
bar up or down using the control button (
ൖ Ÿ൘ ź).
SEQUENCE
Enable/disable sequential display of video in full screen mode.
SEQ-DWELL TIME
Set the dwell time of each, quad or 9 channels display in sequential display
mode.(1-60seconds)
OSD CONTRAST
Set the visibility level of the On Screen Display (OSD).(20-100)
CHANNEL
Select a channel for applying the following settings using the control button
(
ൖ Ÿ൘ ź). Press SEL button to change the setting value of all channels at
once. Once you select an item, then press SEL to set value for all channels.
(DISPLAY, BRIGHTNESS,CONTRAST,HUE,SATURATION)