Filter
Top Products
36
the new password and select OK. Enter the same password again to
confirm and select OK. Then the message “PASSWORD CHANGED” is
displayed.
The factory default password is 11111111.
2-8. Setup – Network Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
NETWORK icon and press SEL button to enter the setup menu item. Navigate through the menu items using
the control button (
ൖ Ÿ൘ ź) and change the value of the menu item using the control button (ൖ Ÿ൘
ź). To return to setup menu screen, press the ESC button
Figure 2.8.1. NETWORK setup screen
Table 2.8.1. Menu items in Network Setup screen
Item Description
PORT
Port number (Default: 5445)
WEB PORT
Web Sever Port number (Default: 80)
NETWORK TYPE
Select a type of network connection. Options are:
LAN, DHCP, ADSL
Note. Other parts of the network setup screen change depending on what
network type you select.
DHCP
DVR automatically get IP varying from time to time from network and does
not therefore need to be set.
ADSL (PPPoE)
ID: Registered ID is necessary for ADSL connection.
Password: Registered password is necessary for ADSL connection.
LAN
IP: Register IP address that is assigned for DVR.
Gateway: Register Gateway that is assigned for DVR.
Subnet Mask: Register Subnet Mask that is assigned for DVR.