Filter
Top Products
27
Figure 2.4.1. Device mode setup screen
Table 2.4.1. Menu items in Device Setup screen
Item Description
ALARM OUT
Set the sensor, motion, and video loss for each alarm.
PTZ
Set the PTZ camera speed, number, type and ID.
CHANNEL
Select specified channel for motion zone setup.
MOTION ZONE
Select either Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY
Set the motion sensitivity for the specified channel.
Control the motion sensitivity from 1 to 9.
KEY TONE
Enable/disable key tone.
REMOTE CONTROL ID
Select an ID of remote control.
1. Select ID.
2. Press the same number as ID set in DVR on a remote control.
3. Then icon will be displayed on Live screen of DVR that respond to
the remote control.
The options are from 00 to 99
SENSOR
Select sensor NO from 1 to 4,9,16.
TYPE
Set the type of sensor for the specified channel. Options are: OFF,
N/O (normal open), and N/C (normal closed).