Filter
Top Products
69
5. Open your web browser. Enter the router IP address in the address bar (The router IP address are
different with the brand and model.), click GO.
6. Enter the user name and password (admin is default) and press the OK button.
7. Select the Port Range Forwarding tab.
8. Enter the each field.
i. Application: Enter a description of the DVR (Example: store1)
ii. Start: Enter the first number of the port you need to port forward (Example: 5445)
iii. End: Enter the last number of the port you need to port forward (Example: 5445)
iv. Protocol: Select Both.
v. IP address: Enter the IP address of the DVR on SETUP>NETWORK>LAN>IP ADDRESS.
vi. Enable: Check the enable box.
9. Select the Save settings button located on the bottom of the window. Then Port forwarding is
finished.
Network access beyond a router
In order to access the DVR remotely beyond a router (firewall), the user must open TCP port for command
level, live channels and storage channels. User need to open 2ports numbers.
If the DVR port number is set to 5445, open the TCP port 5445 and 5446 on the router.
If this port is not opened properly, user can not access DVR beyond a router.