Filter
Top Products
28
2-4-1. ALARM-OUT
Figure 2.4.2. ALARM-OUT setup screen
Table 2.4.2. Menu item in ALARM-OUT Setup screen
Item Description
ALARM OUT
Select an alarm out number.
Available NO: 4CH(1), 9CH(1), 16CH(1)
SENSOR IN
Enable setting up to 4 cameras of 4/9/16 cameras for each alarm.
MOTION ON
Enable setting up to 4 cameras of 4/9/16 cameras for each alarm.
VIDEO LOSS ON
Enable setting up to 4 cameras of 4/9/16 cameras for each alarm.
ALARM DURATION
Set the alarm dwell time from 5 to 60 seconds.
ERROR ALARM
Set the error type for the alarm activation. The options are
OFF, ALL, HDD ERROR and VIDEO LOSS.
2-4-2 PTZ Setup
To control the PTZ functions of the camera, connect a controller to the RS-485 port.
ཛ Connect the RS-485 cables of PTZ camera to the RS-485 port on the rear panel.
ཛྷ Press SEL button or double click to enter the menu. Then PTZ menu screen is displayed.