Filter
Top Products
51
INITIALIZE
Initialize the PTZ settings of the selected camera.
PRESET
Select the PRESET and press the left key (
ൖ) on the control button. Then, number
input window will appear. Set the number (3 digits) using the number key and press
the SEL to set the preset number for the current position.
Press the right key (
൘) on the control button and set the number (3 digits)
to go to the preset number.
TOUR
Select the TOUR and press the right key (
൘) on the control button. Then, number
input window will appear. Set the number (1 digit) using the number key and press
SEL to make the group number work.
Press the left key (
ൖ) on the control button to stop tour.
User can set the preset number in the tour group of the OSD menu.
OSD
Select the OSD to enter the menu. Control keys are Right, Left, UP, Down, Select, Far
(REW KEY), and Near (FF KEY). Press the ESC button to return to the main menu.
Press the PTZ button to escape from the OSD menu.
AUTOSCAN
Press the right key (
൘) on the control button to start auto scan
Press the left key (
ൖ) on the control button to stop auto scan.
PTZ
Press the PTZ button to escape from the OSD menu.
ESC
Press the ESC button to return to the main menu.
NUMBER
Available only on the TOUR and PRESET menu.
Available only on the OSD menu.
: Far / : Near
z Preset/ Tour/ OSD/ Autoscan function are available on the specific model AP8777 and
PMA-200. (Select it in the NAME of PTZ setup menu)
Table 5.1.2. Description of RS-485 port
Data +
Data -