Filter
Top Products
7.3.1.3 Smartcard PIN-Code*
Your digital receiver is equipped with a parental control func-
tion that allows you to block individual programmes as well as
access to the main menu (see Points 6.2.1 and 8.1.6).
In addition programmes not suitable for viewing by children
are pre-blocked by means of an age group code. This paren-
tal control for programmes is permanently active, and cannot
be de-activated as described in Point 8.1.6. To unblock a par-
ticular programme, you must enter the Smartcard PIN
code. This PIN code is stored on the Smartcard. You will
receive it when you receive the card.
The Smartcard PIN code is thus not the same as the
Receiver PIN code of the digital receiver (Point 8.2) and
should not be confused with this.
As soon as you have inserted a Smartcard in the card reader
slot, only the Smartcard PIN code will be active.
If you switch to a channel currently broadcasting a pre-blok-
ked programme, or if you attempt to call up the main menu, a
message will be displayed.
(Fig. 7-10)
> To view the programme, or to call up the main menu,
use the numeric keys to enter the 4-digit
Smartcard PIN code.
> As soon as the correct code has been entered, you
will be able to view the programme or to access the
main menu.
If the PIN code has been entered incorrectly, you can
repeat the entry, or you can exit the menu by pressing
Back.
7.3.1.4 Changing the Smartcard PIN code*
Should it become necessary to change the Smartcard PIN
code, please contact the appropriate Hotline.
7.4 Volume control
You have the facility to adjust the volume of your digital recei-
ver. This makes operating the receiver even more convenient,
since you can access all important functions from a single
remote control, and will rarely have to use the remote control
of your television set. When the digital receiver is switched on
it will reproduce sound at the volume level last set.
> Adjust the volume of your digital receiver using the
Volume + key to increase volume, and the Volume
- key to make it softer.
> Press the Sound on/off key to switch the sound off
(mute), press the same key again to switch the sound
back on.
28
* Only for receivers equipped with
this feature
(Fig. 7-10)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 28