Filter
Top Products
7.5 Selecting a different language
If a programme is broadcast in several languages, or with
various soundtracks ( in the information box), proceed as
follows to select a different language or sound channel:
> Press the Language Select key. A list of langua-
ges currently broadcast will be displayed on screen
(Fig. 7-11)
.
> Use the arrow keys up/down to select the desired
language.
> Confirm by pressing OK.
You can now listen to the programme in the desired langua-
ge. Your digital receiver can also receive mono broadcasts.
> Use the arrow keys right/left to choose between
Mono Channel 1 ( ), Mono Channel 2 ( ) and
Stereo ( ).
7.5.1 Dolby Digital (AC3 mode)
If a programme is broadcast in Dolby Digital sound, this will
be indicated by the Dolby logo in the information window
when you switch to the programme. If the Dolby Digital (AC3)
function has been enabled as per Point 6.3, this programme
will automatically be reproduced in this format.
If you have not switched on the function Dolby Digital
(AC3), switch your receiver to AC-3 mode manually as fol-
lows:
> Press the Language Select key. If available, a list
of the languages currently being broadcast as well as
Dolby Digital (AC 3) will be displayed on screen.
> Use the arrow keys up/down to mark the line
Dolby Digital.
> Confirm by pressing OK.
You can now enjoy the programme in full 5.1 channel Dolby
Digital sound. If you would like your receiver to recognise and
reproduce Dolby Digital broadcasts automatically, you should
set your receiver to automatic AC3 reproduction as described
in Point 6.3.
7.6 TV/Radio switching
The pre-programming setup contains not only television pro-
grammes, but radio programmes as well.
> Press the TV/Radio key to switch the digital receiver
to radio mode.
The receiver will now play the radio programme last
selected.
> Press the TV/Radio key again to return to the televi-
sion programme last viewed.
29
(Fig. 7-11)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 29