Filter
Top Products
> Use the green function key Genres to open a win-
dow showing the programme genres available.
(Fig. 7-
21)
> Use the arrow keys to select the desired program-
me category, and confirm by pressing OK.
An overview of the day’s programmes conforming to
this category will be displayed.
(Fig. 7-22)
> Use the arrow keys up/down to move the marker
to any specific programme.
> Use the arrow keys right/left to move the marker
to programmes with a later starting time.
The individual days of the week are shown along the
lower border of the screen. If information is available
for any of the following days, the corresponding fields
will be highlighted.
> To display the programme contents of a specific day,
press the appropriate numeric key corresponding
to the day of the week.
7.14.8 Exiting SFI
> Press the Menu or TV/Radio key to return to nor-
mal operation.
7.15 Timer
In addition to the SFI timer programming facility, you may
also programme the timer manually.
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line
Timer organizing.
> Confirm by pressing OK.
The sub-menu timer organizing will be displayed.
(Fig. 7-23)
7.15.1 Programming the Timer
> Press the yellow function key New to access the
timer programming, in order to programme a new
event.
( Fig. 7-24)
To programme the timer proceed as follows:
Source
> Use the arrow keys to mark the column Source.
> Press OK to enter the desired source (TV or Radio).
Channel
> Use the arrow keys to mark the column Channel.
> Press OK.
Depending on the previous setting, either the TV or
the radio programme list will now be displayed.
> Use the arrow keys to mark the desired program-
me.
> Press OK to accept this into the timer programming.
37
(Fig. 7-21)
(Fig. 7-22)
(Fig. 7-23)
(Fig. 7-24)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 37