Filter
Top Products
8.6 Conditional Access*
Use this menu item to access the sub-menues relating to the
Smartcard being used, as well as to the CI module. Use the
arrow keys to move to the lines Smartcard* or
CI slot*, and confirm by pressing OK to view information on
the Smartcard or the CI module used.
9 Operation in conjunction with a rotating
antenna (DiSEqC 1.2)
Your digital receiver is equipped for operation in conjunction
with a rotating antenna installation. The DiSEqC control func-
tion (DiSEqC-Level 1.2) allows you to control a suitable motor
via the coaxial cable connection.
> Call up the menu Antenna Settings as described
in Point 6.4
(Fig. 9-1)
and set the DiSEqC Control
(Point 6.4.1) to On.
> Now use the arrow keys up/down to select the
DiSEqC position (e.g. A/B 3) to which you wish to
allocate the motorized rotating antenna.
> Press OK to display a selection window for the
Satellite resp. for the Motor antenna.
(Fig. 9-2)
> Use the arrow keys up/down to mark the line
Motor antenna and confirm by pressing OK.
> Read the note on setting Eastern and Western limits
(Fig. 9-3)
and confirm by pressing OK.
9.1 Eastern and Western limits
To avoid mechanical damage to the dish antenna or the LNC
by obstacles in its path, the maximum rotating range in both
easterly and westerly direction must be set. If there are any
obstacles (e.g. a wall, chimney, etc.) within the rotating radius
of the antenna, this must be considered when setting the
rotating limits. If there are no obstacles to consider, you
should set the limits so that they extend a little beyond the
positions of the most easterly and westerly satellite positions
you wish to receive.
9.1.1 Deleting existing limits
At the outset, you should delete any existing limit settings.
> Use the arrow keys right/left to mark the column
Configuration.
> In the line Motor antenna use the arrow keys
up/down to mark the field Proceed.
> Confirm by pressing OK.
The menu relating to settings for the motor antenna
will be displayed.
(Fig. 9-4)
52
* Only for receivers equipped with
this feature
(Fig. 9-1)
(Fig. 9-2)
(Fig. 9-3)
(Fig. 9-4)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 52