Filter
Top Products
Aborting timer operation
If you wish to delete a timer event programmed by means of
the SFI, proceed as described in Point 7.15. To abort an acti-
ve timer, switch the digital receiver off by pressing the
On/Standby key.
Then press this key again to switch the receiver on, and pro-
ceed to operate it normally.
7.14.7.4 SFI Programme overview
The SFI programme overview function allows you to display
the full daily programme of an individual channel. Proceed as
follows:
> Press the key SFI.
The SFI table “Now” will be displayed.
> Press the blue function key SFI Menu to open a
selection window.
> Use the arrow keys up/down to mark the line
Programmes.
> Confirm by pressing OK. The overview for today of
the programme selected will be displayed.
(Fig. 7-19)
> Use the arrow keys up/down to move the marker
to the appropriate programme or starting time.
The individual days of the week are displayed along
the lower border of your screen. If information is avai-
lable for the following days, the appropriate fields will
be highlighted.
> To display the programme contents for a specific day,
press the numeric key corresponding to the desired
day of the week.
Displaying SFI overview for other programmes
> Press the green function key Programmes.
A list of SFI programmes will be displayed.
(Fig. 7-20)
> Now use the arrow keys to mark the desired pro-
gramme.
> Press the OK key to display the SFI overview of the
marked programme.
7.14.7.5 SFI overview by programme type (genre)
If you are particularly interested in certain types of program-
me, you can have the programme information displayed
according to certain genres such as movies, news, etc.
> Press the SFI key. The SFI table “Now” will be
displayed.
> Press the blue function key SFI Menu to open a
selection window.
> Use the arrow keys up/down to mark the line
Genres.
> Confirm by pressing OK.
36
(Fig. 7-20)
(Fig 7-19)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 36