Filter
Top Products
You can also initiate a manual download procedure immedia-
tely after switching the receiver off (while the display* shows
“oooo”) by pressing the SFI key. During the download proce-
dure the message SFLd will appear briefly in the display, fol-
lowed by an indication of the percentage of SFI data already
transferred, e.g.038P for 38%).
The duration of the download procedure will depend on the
number of programmes that need to be updated. The maxi-
mum period in advance for which data is available is seven
days. Based on the limit on total data that can be stored, this
time-frame will be reduced the more programmes are listed in
the electronic programme guide.
You can decide for yourself, which programme should be
listed in the electronic programme guide. These can be
added to the list as described in Point 8.1.5.
7.14.2 Interrupting the download
The download procedure can be interrupted by switching on
the digital receiver(On/Standby key). The SFI data obtai-
ned during the previous update remains available.
7.14.3 Viewing the Electronic Programme Guide
> Switch on both the receiver and your television set.
> Press the SFI key on the remote control of your digi-
tal receiver.
The electronic programme guide will now be displayed
on screen
(Fig. 7-16).
The programmes you have
selected, or which were listed as part of the default
setting, are shown here with their current programmes
being broadcast.You can now use the SFI function to
obtain information on the contents of various program-
mes. You can also use the SFI functions to select a
particular programme, to pre-select it for later viewing,
or to add it to the timer programming.
7.14.4 Now (Table of current programme contents)
The SFI table “Now”
(Fig. 7-16)
listing current programmes
will be displayed first. The yellow bar to the right of the pro-
gramme name indicates the time elapsed of the current pro-
gramme. The programme currently being viewed is highligh-
ted.
> Use the arrow keys up/down to move the marker
one line at a time. Use the green resp. the yellow
function key to move the marker one page at a time.
> The SFI functions (Point 7.14.3) are now available.
> Press the arrow key right to move to the SFI table
“Next” (See Point 7.14.5)
or
> Press the TV/Radio key to return to normal opera-
tion.
33
* Only for receivers equipped with
this feature
(Fig. 7-16)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 33