Filter
Top Products
> Press the yellow function key Actions, to open an
additional window.
(Fig. 9-5)
> Now use the arrow keys up/down to mark the line
Delete limits.
> Confirm by pressing OK, to transfer the action
selected to the green function key.
> To delete the limits, press the green function key
Delete lim..
> Confirm the message displayed by pressing OK.
(Fig.
9-6)
9.1.2 Setting Eastern limit
> To set the Eastern limit, use the arrow keys to mark
the field Store.
> Now press the arrow key right to rotate the
antenna dish to the maximum possible (or imaginable)
Easterly position.
> Press the yellow function key Actions to open a
window showing the actions available.
> Now use the arrow keys up/down to mark the line
Set East limit.
> Confirm by pressing OK.
> To set the Easterly limit, press the green function key
East limit, read the message displayed on screen
(Fig. 9-7)
and confirm by pressing OK.
9.1.3 Setting the Western limit
> To set the Western limit, use the arrow keys to
mark the field Store.
> Now press the arrow key left to rotate the antenna
dish to the maximum possible (or imaginable)
Westerly position.
> Press the yellow function key Actions, to open a
window showing the actions available.
> Now use the arrow keys up/down to mark the line
Set West limit.
> Confirm by pressing OK.
> Press the green function key West limit, read the
message displayed on screen
(Fig. 9-8)
and confirm
by pressing OK.
9.2 Geo-positioning
If you have a suitable motor, and know the geographic co-
ordinates of your location, this function will facilitate finding
the individual satellite positions.
Note! Switch on the geo-positioning feature only if your
DiSEqC motor supports this function.
> Call up the menu Antenna configuration as
described above.
53
(Fig. 9-5)
(Fig. 9-8)
(Fig. 9-6)
(Fig. 9-7)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 53