Filter
Top Products
> Press the SFI key to display the information.
Lengthy text passages can be scrolled one line at a
time by using the arrow keys up/down or use the
green or red function keys to move backward or
forward one page at a time.
> Press Back to return to the previous table.
7.14.7.2 Marking a programme
> Use the arrow keys or the function keys to
mark/pre-select the desired .
> Confirm by pressing OK. The programme will be
automatically marked, and will be selected when the
broadcast begins.
> Press Back to return to the previous table.
7.14.7.3 Recording a programme (Timer operation)
The function Record serves to switch your digital receiver on
and off for the selected programme, so that this can be recor-
ded even in your absence. Please note that you must also
programme your video recorder to make a recording.
> Use the arrow keys to mark the desired program-
me.
> Press the OK key twice to highlight the line in red
and to accept the data for this programme directly into
the timer memory.
or
> Press the red function key (Timer/VCR) to open a
selection window.
> Use the arrow keys up/down to mark the line
Record.
> Confirm by pressing OK.
The timer menu showing the data of the selected pro-
gramme will be displayed for monitoring purposes. If
necessary, you can make alterations or corrections at
this stage (see 7.15).
> Press Back to return to the previous table.
The appropriate line will be highlighted in red. Your
receiver will be switched on at the starting time of the
programme selected. If the unit was switched on by
means of the timer, this will be indicated by “rEc” in
the display*. Most of the functions of the remote con-
trol are disabled at this stage to avoid any accidental
interruption of the recording.
In standby mode the active timer will be indicated by
the blinking of the colon in the time display.
35
* Only for receivers equipped with
this feature
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 35